LogFAQs > #910355366

LurkerFAQs, Active DB, DB1, DB2, DB3, Database 4 ( 07.23.2018-12.31.2018 ), DB5, DB6, DB7, DB8, DB9, DB10, DB11, DB12, Clear
Topic List
Page List: 1
TopicRecorded a 0-60MPH (0-100km/h) run with my WS6 after some mods compared to stock
MannerSaurus
10/11/18 2:11:14 PM
#1:


For anyone that wants to see my best run so far:

https://imgur.com/ZowIuLV

I'm not the best driver ever, but 4.4 60MPH I'm pretty happy with for a 20 year old car (1998.) The stock Audi R8 V8 had a 4.2 60MPH, at least on the first year of release. You can also see at 113MPH, I was like "NOPE, I'M DONE" and backed off the throttle. LOL.

Just for anyone curious what I have different from stock (black line) to bolt-ons (purple line):

Long-Tube Racer Headers / Custom Catless Y-Pipe / Borla Catback exhaust (Full exhaust replacement)
SLP Air-Lid

And I put in new NGK Spark Plugs, MSD Super Conductor Wires, new Fuel Pump / Belt / Alternator / Battery and there was some weight reduction as I removed all of the EGR and AIR Pump emissions stuff to accommodate the Race Headers (and the headers weigh less than the stock cast manifold in the first place), and I also removed the windshield cleaner pump and reservoir.

Since this recording I have installed a new bigger throttle body and intake manifold that added about 20-30RWHP, (based on other people's dynos for the same upgrade), but I'm not going to bother doing another run just for that. When I get a tune for all of this I might do another run and see if I can beat it.
---
Hoppe hoppe Reiter, und kein Engel steigt herab
mein Herz schlagt nicht mehr weiter, NUR DER REGEN WEINT AM GRAB
... Copied to Clipboard!
Topic List
Page List: 1